
Notifications
Clear all
23 hours ago
Favorited a post in the topic Sources for ethanol free fuel
5 days ago
Replied to the topic Of wobbly wheels and castle nuts...
IMO: Slightly worn bearings can be compensated for by re-torquing the nut. I seem to recall that this was observed on another MGB during a Tech Squad session some time ago. It does not hurt to check the torque on the nut anyway. However, for bearings, the wobble’ should be observed in all directi...
5 days ago
Replied to the topic Of wobbly wheels and castle nuts...
A properly installed castle nut should not come loose as long as the cotter pin is in place. For proper installation: 1. Tighten to the specified torque. 2. Check to see if one of the slots in the nut is aligned with the hole in the shaft. 3. If so, install and secure the cotter pin. 4. If no slot i...
5 days ago
Replied to the topic Mind the Gap
The .035 gap is for a '75 or later MGB with the Stromberg and a catalytic converter. With the Weber and cat converter removed, use the .025 gap. If the cat converter is still in place, let me know.
5 days ago
Replied to the topic Educational and entertaining YouTube Channels
For owners of MGBs, I would recommend this channel. An entertaining look at a full disassembly and restoration of a 1972 MGB
Maggie's Makeover
Ride along with Studio Steve as he attempts to restore Maggie his 1972 MGB that he bought in 1977 and has been hibernating for over 40 years. Episodes c...
5 days ago
Replied to the topic Educational and entertaining YouTube Channels
More MGB videos on youtube at Alex's Garage. Alex Platacis has done some interesting and informative videos while working on his 1977 MGB, including a chrome bumper conversion, a center-push horn in lieu of the stalk and a 3D printed cup holder.
Alex's Garage:
6 days ago
Replied to the topic Of wobbly wheels and castle nuts...
My 78 Spitfire needed new bearings at 76K, it is not that difficult to do. The challenge was getting the Castle nut right.
the wheels could be rocked side to side and top to bottom.
6 days ago
Created the topic Of wobbly wheels and castle nuts... in Technical Help
I got my 1977 MGB inspected last month (I passed), but the inspector noted that the left front wheel was "loose" (side to side, not up and down). What would be the way to determine whether it's simply a loose castle nut that needs to be tightened or whether it's a larger issue with the wheel bearin...
6 days ago
Replied to the topic Mind the Gap
@dtschuder Dan - Thanks for the reply. Would the gap be any different, given that I have a 1977 with a Weber in place of the original Stromberg?
I think when I checked the plugs they were Champion N9Ys and they were all the appropriate color - no oil fouling, etc. Thanks.